Пришёл такой китайский пакетик:
Cheap board software, Buy Quality module gsm directly from China module board Suppliers: Если вы хотите купить больше, чем 150 шт., Вы можете связаться с нами, Мы можем дать вам лучшие цены, Потому что
// www.aliexpress.com
Цена вопроса чуть больше $1 (я рублей 80 с чем-то платил, сейчас — 95).
Как сразу программировать под Arduino IDE сходу не нашёл (оно не видится как COM-порт
), пришлось порыться. Оказалось, вот этот простенький рецепт годится:
The bootloader is the code that is pre-programmed on your Digispark and allows it to act as a USB device so that it can be programmed by the Arduino IDE.
The Digispark runs the “micronucleus tiny85” bootloader version 1.02, an open source project:originally written by Bluebie:
CAUTION We are not at this point supporting upgrading the firmware, so if you decide to, you do so entirely at your own risk.
The Digispark uses the Arduino IDE 1.6.5+
and click OK
Note: If you already have additional URLs entered in that box, then click the button on the right of the box and enter this URL on a new line.
// Дальше — digistump.com
Залил «мигалку». Мигает. Размер бинарника в 668 байт (11% от максимального) прикалывает
Пойдёт на всякие ультракомпакнтые изделия без внешней связи (или с NRF24L01, или с 433МГц).