3.1.2.1 Memory DIMM Support
The server board SE7500WV2 supports DDR200 compliant registered ECC DIMMs and
DDR266 compliant ECC DIMMs operating at 200MHz. Only DIMMs tested and qualified by Intel
or a designated memory test vendor are supported on the server board SE7500WV2. A list of
tested DIMMs will be made available. Note that all DIMMs are supported by design, but only
fully tested DIMMs will be supported.
The minimum supported DIMM size is 128 MB. Therefore, the minimum main memory
configuration is 2 x 128 MB or 256 MB. The largest size DIMM supported is a 1 GB stacked
registered DDR200 OR DDR266 ECC DIMM based on 512 megabit technology.Only registered DDR200 and DDR266 compliant, ECC, DDR memory DIMMs will be supportedECC single-bit errors will be corrected and multiple-bit error will be detected. SE7500WV2 also supports Intel® x4 Single Device Data Correction feature with x4
DIMMs.The maximum memory capacity is 6 GB The minimum memory capacity is 256 MB
Здравствуйте, гость!
Гостевой функционал сайта ограничен. Для полноценной работы зарегистрируйтесь, пожалуйста.